Core Value
In industrial coating, printing, and thermoforming processes, clear transparent quartz lamps emit intense point-source radiation directly from the glowing filament wire. When mounted close to sensitive substrates—such as thin polymer films, delicate textiles, or glossy painted panels—clear tubes can create subtle filament striping, localized hot spots, and intense visible glare that fatigues line operators.
The Milky Quartz Infrared Heating Tube resolves both optical and thermal uniformity challenges through micro-bubble diffused fused silica engineering. During tube manufacturing, millions of microscopic gas bubbles are uniformly entrained within the high-purity silica glass matrix, giving the envelope its characteristic opaque white satin appearance. This internal micro-structure acts as a natural optical diffuser and secondary radiator:
-
360° Uniform Beam Diffusion: Infrared rays emitted by the internal coil scatter evenly through the milky quartz wall, eliminating filament striping and projecting a smooth, homogeneous thermal blanket across the entire workpiece width.
-
Medium-to-Long-Wave Spectral Shift (2.0 to 5.0 µm): The opaque silica envelope absorbs a portion of shorter-wavelength filament energy and re-emits it in the 2.0 to 5.0 micron medium-to-long-wave infrared band—matching the peak absorption curves of water, solvents, paper, wood, textiles, and most thermoplastics.
-
Glare-Free Visual Comfort: The milky white tube wall filters out harsh visible filament brightness, protecting operator eyesight in open inspection zones without relying on external filters.
Internally, a computer-wound iron-chromium-aluminum (FeCrAl) or nickel-chromium (Ni80Cr20) resistance coil is supported along the central axis of the tube, reaching operating temperatures within 20 to 40 seconds of 220V or 380V energization.
- ✓ Diffused Strip-Free Radiant Uniformity: Micro-bubble milky silica envelope scatters infrared rays evenly, eliminating filament hot-spot striping across sensitive films, coatings, and webs.
- ✓ Optimal 2.0–5.0 µm Medium-to-Long-Wave Output: Absorbs and re-emits radiant energy in the ideal spectral range for rapid water evaporation, ink curing, and polymer plasticization.
- ✓ Natural Glare Reduction: Opaque satin white quartz body blocks harsh visible filament glare without painted coatings that could peel or degrade over time.
- ✓ Fast 20–40 Second Thermal Response: Low-mass fused quartz construction heats up and cools down rapidly compared to heavy ceramic emitters, preventing substrate scorching during conveyor stops.
- ✓ High Chemical & Thermal Shock Resistance: Pure fused silica glass resists acid fumes, solvent vapors, moisture splashes, and cyclic temperature swings up to 900°C.
- ✓ Direct OEM Manufacturing: Custom tube lengths (200mm to 3000mm+), outer diameters (Φ10mm–Φ25mm), 220V/380V power ratings, and terminal styles produced by HT HEATER.
Technical Specifications & Performance Data
| Parameter | Standard Specification | Customizable Options | Engineering Notes |
| Product Category | Milky Quartz Infrared Heating Tube | Clear quartz IR, ruby quartz IR, gold-coated IR | Opaque white satin diffused quartz emitter |
| Operating Voltage | 220V / 380V AC | 110V, 120V, 230V, 240V, 400V, 415V, 480V | Supports single-phase and 3-phase star/delta arrays |
| Power Output (Wattage) | 300W to 6000W+ per tube | Custom watt densities up to 50 W/cm | Calibrated to active heated length and air velocity |
| Peak Infrared Wavelength | 2.0 to 5.0 µm (Medium-to-Long Wave) | Medium-wave (1.4–3.0 µm) | High absorption in water, coatings, wood & plastics |
| Tube Diameter (OD) | Φ10mm, Φ12mm, Φ14mm, Φ16mm, Φ18mm | Φ20mm, Φ22mm, Φ25mm | Larger diameters selected for long span rigidity |
| Overall Tube Length ($L$) | 300mm to 2500mm+ Standard | Custom lengths up to 3200mm | Includes unheated ceramic-capped cold ends |
| Quartz Envelope Finish | Opaque Milky White Satin Quartz | Half-tube ceramic reflector coating | Permanent micro-bubble silica structure |
| Max Operating Temp | 700°C to 950°C (1292°F – 1742°F) | Regulated via SCR / thyristor power controller | Heavy-duty FeCrAl or Ni80Cr20 resistance coil |
| End Cap & Termination | Steatite Ceramic Caps + Braided Leads | Threaded M4/M5 studs, R7s caps, spade/ring lugs | High-temp fiberglass-sleeved nickel conductors |
Industrial Applications & Solutions
This diffused, milky quartz infrared heating tube is the preferred radiant emitter across continuous drying, curing, and heating lines:
-
Printing, Paper & Film Converting: Evaporates water-based and solvent inks, varnishes, and laminating adhesives evenly across wide paper and plastic webs without striping.
-
Powder Coating & Liquid Paint Curing: Gels and cures metallic, matte, and textured industrial finishes smoothly with zero glare and uniform edge-to-edge cross-linking.
-
Textile, Nonwoven & Carpet Drying: Penetrates woven fabrics, coated technical textiles, and latex backings for rapid moisture removal without scorching fibers.
-
Plastic Thermoforming & Sheet Pre-Heating: Softens thin-to-medium gauge PET, PVC, PS, and ABS sheets uniformly across multi-zone forming platens.
-
Woodworking & Furniture Finishing: Rapidly cures waterborne stains, sealers, and lacquers on flat panels and moldings without overheating wood resins.
-
Commercial Food Processing & Baking: Delivers clean, even radiant heat for baking biscuits, roasting nuts, dehydrating vegetables, and warming conveyorized food trays.
HT Heater Advantage: Why Choose Our Quartz IR Heating Tube?
| Engineering Feature | HT Heater Milky Quartz IR Tube | Generic Milky Quartz Tubes | Operational Advantage |
| Silica Matrix Consistency | Uniform micro-bubble fused quartz (>99.95% SiO2) | Sandblasted clear glass or uneven low-grade quartz | True internal micro-bubble quartz will never wear smooth, peel, or suffer uneven transmission across the tube length. |
| Internal Coil Support | Precision-spaced internal wire supports | Unsupported long spiral filaments | Prevents filament sagging and turn-to-turn shorting across long 220V/380V horizontal oven spans. |
| High-Temp End Caps | High-density steatite ceramic caps with pure nickel leads | Fragile cement plugs with thin copper leads | Withstands continuous oven ambient temperatures up to 500°C without terminal oxidation or wire embrittlement. |
| Electrical Testing | 100% cold resistance & high-potential dielectric tested | Random batch sampling | Guarantees exact wattage tolerance (±5°) and safe electrical isolation across 380V industrial power banks. |
Installation & Handling Guidelines
-
Horizontal Mounting Alignment: Install standard single-tube milky quartz heaters horizontally (within ±5° of level) so the internal helical coil rests evenly along its support points without downward sagging.
-
Stress-Free Spring Mounting Clips: Support the ceramic end caps using spring-loaded stainless steel clips that permit longitudinal thermal expansion during heat-up cycles. Avoid rigid bolted clamping directly over the quartz glass body.
-
Keep Quartz Envelope Clean: Wear clean cotton or nitrile gloves during installation to prevent oil, grease, or metal dust from contaminating the milky quartz surface. Wipe tubes gently with isopropyl alcohol before initial startup.
-
Integrate SCR Phase-Angle Control: For optimal emitter lifespan and fine process temperature tuning, drive 220V and 380V milky quartz arrays using an SCR (thyristor) power controller with soft-start ramp-up.
Customer Success Stories
Case 1:
Technical Textile & Nonwoven Coating Line (Germany)
-
Application: Continuous infrared pre-drying hood positioned ahead of a stenter frame for water-based polyurethane textile coatings.
-
Challenge: Clear short-wave quartz lamps created subtle longitudinal heat streaks across the delicate white fabric and caused severe visual glare for line operators monitoring web tension.
-
Solution: Partnered with HT HEATER to retrofit the drying hood with 380V Industrial Milky Quartz Infrared Heating Tubes (1800mm length, Φ16mm OD) outfitted with steatite ceramic end caps and braided fiberglass leads.
-
Results: 100% STREAK-FREE COATING UNIFORMITY & GLARE ELIMINATION. The diffused 2.0–5.0 µm radiant field evaporated moisture evenly across the entire web width while reducing oven energy consumption by 16%.
Case 2:
Industrial Wood Panel & Furniture Lacquer Line (Poland)
-
Application: Conveyorized flash-off and curing tunnel for waterborne UV-curable wood finishes on MDF cabinet doors.
-
Challenge: Conventional hot-air blowers stirred up ambient dust onto wet lacquer surfaces, while heavy ceramic emitters cooled too slowly during conveyor stops, blistering the MDF veneer.
-
Solution: HT Heater supplied custom 220V milky quartz infrared heating tubes engineered with fast-response FeCrAl filaments and threaded stud terminals for easy busbar wiring.
-
Results: DUST-FREE MIRROR FINISHES & ZERO BLISTERING. The non-contact diffused infrared output flashed off water solvents in 25 seconds without air turbulence, and cooled rapidly whenever the conveyor paused.
Pricing & Procurement Options
- OEM Customization: Tailored shapes, custom cutout holes for pipe nozzles, specialized voltage/wattage configurations, and custom strap lengths.
- Lead Times: Custom samples: 3–5 working days. Bulk production orders: 8–12 working days upon technical drawing sign-off.
- Packaging & Shipping: Individually bagged with protective foam padding and packed into heavy-duty 5-ply export cartons to prevent bending or lead wire stress during international transit.
- Minimum Order Quantity (MOQ): Low MOQ starting at 5–10 units for custom dimensions; competitive volume pricing tiers for equipment manufacturers.
Global Certifications & Compliance
- CE Marking
Fully compliant with European safety and environmental standards. - LVD Compliance
Low Voltage Directive tested for continuous thermal load safety. - RoHS Compliant
Constructed using environmentally safe, lead-controlled brass alloys. - ISO 9001
Certified quality control covering CNC machining, coil pressing, and electrical testing.
Quality Documentation: Certificate of Conformity (COC) and insulation resistance test reports included.
Comprehensive After-Sales Support
-
- Warranty: 1-Year Comprehensive Warranty covering internal heating element and built-in sensor.
-
Technical Support: Application engineers available for wattage distribution calculation, thermocouple calibration, and nozzle fitting assistance.
-
Global Response Network: BACKED BY 30+ YEARS MANUFACTURING EXPERIENCE with technical inquiry feedback within 2 hours.
Ready to Optimize Your Injection Molding?
Next Steps:
- 📧 Request Custom Quote – Send your nozzle dimensions, wattage, voltage, and HT-CLW-450 drawing requirements.
- 🔧 Free Design Consultation – Work with our thermal engineers to optimize heat distribution and lead insulation.
- 📦 Order Test Samples – Evaluate thermal performance on your injection molding machine.
- 📞 Contact Hot Runner Experts – Response within 2 hours
-
Leading Manufacturer & Export of Industrial Heaters
Providing A One Stop Solutions To All Industrial Heaters Needs
SINCE 1990 Professional Heater Producer | Our Products Undergo Multiple Rigorous Quality Checks

